|
| Stick Electrodes |
| Murex 6011C | E6011 | AC | Murex 6011C features a smooth arc that wets and spreads readily with minimum spatter. Excellent for galvanized steel and for rusty or oily steel in maintenance and repair work. Delivers a minimum 60,000 psi (410 MPa) tensile strength. |
| Murex 6013D | E6013 | AC | Excellent choice for general purpose welding. Murex 6013D features a smooth, steady arc with either AC or DC, even on low open circuit voltage welders. Minimal operator skill is required. Delivers a minimum 60,000 psi (410 MPa) tensile strength. |
| Murex 7014 | E7014 | AC | For high-speed all-position welding. Great choice when low penetration is desired, such as for use on sheet metal. Also great for poor fit-up joints. Murex 7014 has enhanced arc stability on low open circuit voltage welders |
| Murex 7024 | E7024 | AC | Murex 7024 has a heavy coating with high iron powder designed to deliver excellent deposition rates. Welding is in the flat and horizontal positions only. |
| Murex 7016 | E7016 H8 | AC | Murex 7016 is a good all-position stick electrode with a relatively quiet arc and low spatter. Features a low hydrogen content and delivers a minimum 70,000 psi (483 MPa) tensile strength. |
| Murex 7018 MR | E7018 H4 | AC | A low hydrogen stick electrode, designed to pass the most severe x-ray requirements in all positions. Murex 7018 MR features a soft and quiet arc with exceptionally low spatter. |
| Murex B7018 MR | E7018 H4 | AC | Murex B7018 MR is a good choice when the project involves hard-to-weld steels. Great for welding on thick sections and restrained joints when cracking is an issue. |
| MIG Wire |
| Murematic S3 | ER70S-3 | DC+ | The best value in the industry for general purpose carbon steel welding. Murematic S3 copper coated wire is an excellent choice for a broad spectrum of single and multiple pass welding applications. It is a low carbon wire with moderate levels of manganese and silicon that has an excellent record for feedability and trouble-free performance. Recommended for welding on base material that is clean or has light surface contaminants such as rust or mill scale. |
| Murematic S4+ | ER70S-4 | DC+ | Murematic S4+ is your first choice when welding on metals with a low to medium presence of surface contaminants such as rust or mill scale. Murematic S4+ MIG wire has all of the advantages of Murematic S3, with slightly higher levels of manganese and silicon. It has higher "cleaning" levels, and produces a more fluid weld puddle and flatter bead profile. Murematic S4+ has an excellent reputation for feedability and trouble-free performance. |
| Murematic S6 | ER70S-6 | DC+ | Murex's top copper coated, mild steel MIG wire electrode, Murematic S6 is an excellent choice for welding on metals with a medium to high presence of surface contaminants such as rust or mill scale. It is a low carbon, high manganese, and very high silicon wire that exhibits very good puddle fluidity, bead profile and spatter control. |
| Stainless Steel Stick Electrodes |
| Murex 308/308L-16 | E308-16 | AC | Intended for joining base metal type 304 or 304L stainless steel. Can also be used to join other common austenitic stainless steel referred to as "18-8" steels. Good all-position electrode, with the exception of vertical down travel. Murex 308/308L-16 exhibits exceptional vertical-up travel capabilities. |
| Murex 309-16 | E309-16 | AC | Murex 309-16 is intended for joining stainless steels to carbon steels or low alloy steels. Welds in all positions, except vertical down. Exceptional vertical-up capability. |
| Murex 316/316L-16 | E316-16 | AC | Murex 316/316L-16 electrodes is intended for joining types 316 and 316L wrought steels. A good all-position electrode, except vertical down. Exceptional vertical-up capabilities. |
| Stainless Steel Cut Lengths |
| Murex TIG 308/308L | ER308 | DC- | This cut length TIG consumable is for use on the more common austenitic stainless steel grades referred to as "18-8" steels. |
| Murex TIG 309/309L | ER309 | DC- | For use on more high alloyed austenitic stainless steels. Can also be used on "18-8" steels, since it overmatches the corrosion resistance, if the weldment will not be exposed to temperatures of 1000 to 1700°F (538 to 927°C). |
| Murex TIG 316/316L | ER316 | DC- | Undiluted weld metal is designed to contain considerable ferrite for maximum crack resistance. Should not be used on 316L joints in service for urea manufacture, as this environment will attack the ferrite. |
| Stainless Steel MIG Wire |
| Murex 308LSi | ER308LSi | DC+ | This all-position, quality MIG wire is ideally suited for joining common austenitic stainless steel grades referred to as "18-8" steels. It is specially processed to provide superior feeding and arc stability. |
| Murex 309LSi | ER309LSi | DC+ | All-position stainless steel wire for joining higher alloyed austenitic stainless steels. Can also be used on "18-8" steels, since it overmatches the corrosion resistance, if the weldment will not be exposed to temperatures of 1000 to 1700°F (538 to 927°C). |
| Murex 316LSi | ER316LSi | DC+ | All-position stainless steel wire. The undiluted weld metal is designed to contain considerable ferrite for high crack resistance in 316L joining and cladding. Can also be used on "18-8" stainless steels. |
| |
|
